The old batch was starting to show its age, so there are now some fresh ISO images. There are also some significant improvements in them. They are marked 20200411. Of course, fresh rootfs tarballs are also included.
As usual, they are available in ppc64le (POWER8+), ppc64 (G5+) and ppc (generic) variants, with glibc and musl both supported.
Let’s see:
Serial console support
There is now support for serial console integrated in the images, so you don’t necessarily need a monitor and/or go through a bunch of hoops to manually set up the serial console. All you need to do is append some things on the kernel command line.
For example, on a Talos 2/Blackbird/qemu-system-ppc64:
console=tty0 console=hvc0
The first will get you a monitor as usual, the second the serial console. Keep in mind that it has to be last! There is a special hook in the live initramfs that sets up the respective agetty services.
Dual kernels for big endian
Since some Macs have trouble booting on recent 5.x kernels, we’re now shipping a 4.4 LTS kernel as an alternative to the primary (currently 5.4) one. You can choose between them in the bootloader. So if you have one of those affected machines, you can at least get the installer booted.
Keep in mind that with a network installation you’ll get the default kernel again. The installer gives you an option to drop into the installed system before rebooting. You can install a kernel of your choice there.
Bootstrap partition validation in installer
Since a bunch of people complained about the installer booting fine but the final system not being bootable and the issue turned out to be swapped parameter order when creating the bootstrap partition on their Mac (and therefore the partition having an incorrect type), the installer now checks whether the partition is correct and tells you ahead if it’s not.
Yaboot shipped in the ISOs
If you’re one of those really unlucky people who can’t get GRUB to load and there is no workaround (such one of those described in the FAQ), you can now use yaboot to boot the image. The default is obviously GRUB, but you can bring it up manually, e.g.:
boot ud:,\boot\yaboot conf=ud:,\etc\yaboot.conf
Of course, that doesn’t mean yaboot is supported in the installer; it’s still old and obsolete, and doesn’t play nice with the rest of the system (and thus requires manual maintenance). However, it allows you to get the ISO booted, install the system without having it set up the bootloader, and set it up afterwards by hand.
Fewer graphical flavor images
Since generating all those graphical flavor images took way too long, needed a ton of space, and some of them didn’t even work for various reasons, we are no longer shipping graphical flavors with the exception of Xfce. Keep in mind that this only applies to the live images! You can still install the desktop environment of your choice in the final system, of course.
Other minor stuff
The graphical flavor images for 32-bit PowerPC now ship Xorg drivers for Rage 128 (r128) and Rage Pro (mach64). This could help some G3s and so on, but do keep in mind that it won’t likely start up out of the box, as the drivers always needed manual configuration (Xorg modelines, etc.)
There have also been assorted fixes in the installer, such as simpler and more robust code that takes care of setting up the NVRAM stuff to make Void boot as the default OS. And obviously, the software stack is fresh and updated.
That’s it for now. Grab a copy from the Download page, and test it if you have the hardware. Any issues go into the bug tracker as always, and we have an IRC channel as well (#voidlinux-ppc on Freenode).
Next batch will come once enough crucial fixes have accumulated, or once it starts getting dated again.
